| |
Aviation Maintenance Technology |
| |
-
AMNT 204 - Reciprocating Engine Overhaul
4 hrs (Sem I)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This course is an intensive study of the theory, construction, maintenance, repair and overhaul of aircraft reciprocating engines. 120 total lecture/laboratory hours.
|
| |
-
AMNT 206 - Powerplant Systems and Propellers
4 hrs (Sem I)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This course covers theory and repairs of powerplant systems including lubrication, fire protection, cooling and exhaust. Also covers propeller and propeller systems. 120 lecture/laboratory hours.
|
| |
-
AMNT 207 - Powerplant Electrical
4 hrs (Sem I)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This course covers theory, repair and maintenance of powerplant instrument, ignition and starting systems. 120 total lecture/laboratory hours.
|
| |
-
AMNT 262 - Turbine Engines
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This course covers theory, maintenance and overhaul of turbine engines. 120 total lecture/laboratory hours.
Reading and Writing Intensive Course
|
| |
-
AMNT 264 - Engine Installation and Troubleshooting
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This course covers removal, installation and troubleshooting of turbine and reciprocating engines. 120 total lecture/laboratory hours.
Speaking Intensive Course
|
| |
-
AMNT 266 - Aircraft Inspection
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This is an intensive course simulating typical FAA 100-hour and annual inspections. Assembly and rigging of both fixed wing and helicopters will be studied. 120 total lecture/laboratory hours.
|
| |
-
AMNT 267 - Airframe Inspection
2 hrs (Sem I, II)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This is an intensive course simulating typical airframe FAA 100-hour and annual inspections. Assembly and rigging of both fixed-wing aircraft and helicopters will also be studied. This course is for Airframe Certificate students only. 90 total lecture/laboratory hours.
|
| |
-
AMNT 271 - Engine Inspection
1 hr (Arranged)
Prerequisite(s): A grade of C or better in READ 009 and MATH 010 , or SAT Reading score of 380 or greater, or appropriate placement test scores. This is an intensive course simulating typical Powerplant FAA 100-hour inspections. This course is for Powerplant Certificate students only. 30 lecture/laboratory hours (one-week course).
|
| |
-
AMNT 272 - FAA Written, Oral and Practical Testing (General, Airframe and Powerplant)
1 hr (Arranged)
Prerequisite(s): A grade of C or better in all required AMNT courses, PHYT 101 or higher, MATH 016 or higher, and eligibility based on current FAA regulations. Administration of pretest and FAA oral, practical, and/or written examinations. Successful completion and eligibility based on current FAA regulations lead the candidate to an FAA Mechanic Certificate with Airframe and Powerplant ratings. Special exam fee. Offered only to students testing out of sequence.
|
| |
-
AMNT 274 - FAA Written, Oral and Practical Testing (General and Airframe or Powerplant)
1 hr (Arranged)
Prerequisite(s): A grade of C or better in required courses and eligibility based on current FAA regulations. Administration of pretest and FAA oral, practical, and/or written examinations. Successful completion and eligibility based on current FAA regulations lead the candidate to an FAA Mechanic Certificate with either an Airframe or Powerplant Rating. Special exam fee.
|
| |
-
AMNT 276 - FAA Written, Oral and Practical Testing (Airframe or Powerplant)
1 hr (Arranged)
Prerequisite(s): A grade of C or better in required courses and eligibility based on current FAA regulations. Administration of pretest and FAA oral, practical, and/or written examinations. Successful completion and eligibility based on current FAA regulations lead the candidate to an FAA Mechanic Certificate with Airframe or Powerplant Ratings. Special exam fee.
|
| |
-
AMNT 287 - FAA Certification
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in all required AMNT courses, PHYT 101 or higher, MATH 010 or higher, and eligibility based on current FAA regulations. Administration of pretest and FAA written, oral and practical examinations for Airframe and Powerplant Mechanic Ratings. Special exam fee. 120 total lecture/laboratory hours.
|
| |
-
AMNT 295 - Aviation Maintenance Avionics I
4 hrs (Sem I)
Prerequisite(s): A grade of C or better in AMNT 104 and AMNT 167 or holder of an A&P license. Students will build on their acquired knowledge from Aviation Basic Electricity and Airframe Electrical studies. They will continue on into the area of amplification, receiver and transmitter operations. 4 lecture hours.
|
| |
-
AMNT 296 - Aviation Maintenance Avionics II
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in AMNT 295 . Students will build on their acquired knowledge from AMNT 295 . They will continue on into the area of amplification, receivers and transmitter operations primarily in the aviation area. There will be additional exposure to new technologies, digital, optical and microwave systems. This course will finish to prepare you for the testing for the GROL (General Radiotelephone Operators License) including a Radar Endorsement. 4 lecture hours.
|
| |
-
AMNT 297 - FCC GROL Pre-testing
2 hrs (Summer)
Prerequisite(s): A grade of C or better in AMNT 295 and AMNT 296 . (General Radiotelephone Operators License) 2 lecture hours.
|
| |
-
AMNT 300 - Boeing 737 Inspection and Servicing Procedures
3 hrs (Sem I, II, Summer)
Prerequisite(s): A valid FAA Mechanic Certificate with Airframe and Powerplant ratings. An in-depth study of the inspection, testing, and routine service functions performed during a typical Boeing 737 “C-check.” The use of maintenance manuals, job-cards, integrated parts manuals, and specialized testing and inspection equipment will be practiced. Limited enrollment. Offered only at the Indianapolis Aviation Technology Center. 120 lecture/ laboratory hours.
|
| |
-
AMNT 305 - Boeing 737 Line Maintenance
3 hrs (Sem I, II, Summer)
Prerequisite(s): A valid FAA Mechanic Certificate with Airframe and Powerplant ratings. This course focuses on component and system-specific non-routine repairs including wheel, brake and tire servicing, lighting and cabin repairs, cockpit component removal and replacement, APU and battery maintenance, and potable and waste water system troubleshooting. Limited enrollment. Offered only at the Indianapolis Aviation Technology Center. 120 lecture/laboratory hours.
|
| |
-
AMNT 320 - Advanced Aircraft Electronic Systems
6 hrs (Sem I, II, Summer)
Prerequisite(s): FAA Mechanic Certificate with Airframe and Powerplant ratings. An in-depth, integrated study of transport category aircraft electrical, communication, navigation, and flight management systems. Topics include inertial navigation and global positioning systems, engine indicating and crew alert systems, traffic alert and collision avoidance systems, airline communication addressing and reporting systems, and Aeronautical Radio, Inc. definitions and standards. Test equipment utilization, wiring schematic interpretation, logic circuitry, and advanced troubleshooting techniques are also addressed. Offered only at the Indianapolis Aviation Technology Center. 240 lecture/laboratory hours.
|
| |
-
AMNT 330 - Transport Category Aircraft Inspection and Repair
3 hrs (Sem I, II, Summer)
Prerequisite(s): FAA Mechanic Certificate with Airframe and Powerplant ratings. An intensive study of damage assessment, material properties and choices, repair layouts, and specific inspection and repair techniques pertaining to the airframe, engines, and systems of large aircraft. Advanced borescope methods, control surface balancing, and the proper use of manufacturer’s reference data is practiced. Offered only at the Indianapolis Aviation Technology Center. 120 lecture/laboratory hours.
|
| |
-
AMNT 340 - Air Transportation Carrier Operations
3 hrs (Sem I, II, Summer)
Prerequisite(s): FAA Mechanic Certificate with Airframe and Powerplant ratings. This course familiarizes students with the procedures, manuals, data, forms, safety concerns, and environmental issues common to airlines and other air carriers. Special attention is given to fault isolation and reporting, weight and balance procedures, fueling, hazardous material handling, and OSHA regulations. Offered only at the Indianapolis Aviation Technology Center. 120 lecture/laboratory hours.
|
Apprenticeship Carpentry |
| |
-
APPC 101 - Opportunities in Construction
1 hr (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics covered include formal construction training, apprenticeship programs, employee responsibilities, and employee expectations of employers, training programs, and apprenticeship committees. 1 lecture hour.
|
| |
-
APPC 111 - Carpentry Applications I
3 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics and applications covered in this course include wood building materials, fasteners, adhesives, hand and power tools, floor systems, wall and ceiling framing, roof framing, windows, and exterior doors. 3 lecture hours.
|
| |
-
APPC 112 - Carpentry Applications II
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics and applications covered in this course include construction drawings – part I, introduction to concrete and reinforcing materials, foundations and flat work, and concrete forms. 4 lecture hours.
|
| |
-
APPC 113 - Carpentry Applications III
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics and applications covered in this course include construction drawings – part II, reinforcing concrete, handling and placing concrete, patented forms, and tilt-up wall systems. 4 lecture hours.
|
| |
-
APPC 114 - Carpentry Applications IV
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics and applications covered in this course include stair construction, reinforcing concrete, patented forms, interior finish, ceiling systems, and exterior wall finishes. 4 lecture hours.
|
| |
-
APPC 115 - Carpentry Applications V
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics and applications covered in this course include roofing, installation of cornices, gutters, downspouts, and various exterior sidings. 4 lecture hours.
|
| |
-
APPC 116 - Carpentry Applications VI
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics and applications covered in this course include finishing of stairs, laser instruments, and supplements to ceiling systems. Students are also introduced to supervision practices. 4 lecture hours.
|
| |
-
APPC 117 - Carpentry Applications VII
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Carpentry Apprenticeship Students. Topics and applications covered in this course include metal studs and drywall, interior finish, doors and windows, wall and floor specialities, and cabinetry. 4 lecture hours
|
Apprenticeship Electrical |
| |
-
APPE 101 - Electrical Blueprints
1 hr (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Students are introduced to the basic terminology, applications, and practices for reading electrical blueprints used in the electrical construction industry. 1 lecture hour.
|
| |
-
APPE 111 - Electrical Theory, Components, and Applications I
3 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Topics and applications covered in this course include National Electrical Code specifications, raceways, boxes, fittings, conductors, electrical commercial and residential wiring. 3 lecture hours.
|
| |
-
APPE 112 - Electrical Theory, Components, and Applications II
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Topics, theory, and applications covered in this course include electric motors, alternating current, grounding, conduit bending, and conductor installations. 4 lecture hours.
|
| |
-
APPE 113 - Electrical Theory, Components, and Applications III
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Topics, theory, and applications covered in this course include conductor terminations, and splices, circuit breakers, fuses, contactors, relays, electric lighting, and installation of electrical services. 4 lecture hours.
|
| |
-
APPE 114 - Electrical Theory, Components, and Applications IV
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Topics, theory, and applications covered in this course include load calculations (branch and feeders circuits), conductor selection, conductor calculations, overcurrent protection, raceway, box, and fitting fill requirements, wiring devices, and electrical distribution services. 4 lecture hours.
|
| |
-
APPE 115 - Electrical Theory, Components, and Applications V
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Topics, theory, and applications covered in this course include distribution system transformers, lamps, ballasts, and hazardous locations, and electric motors – part II. 4 lecture hours.
|
| |
-
APPE 116 - Electrical Theory, Components, and Applications VI
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Topics, theory, and applications covered in this course include basic electronic theory, load calculations (feeders and services), practical applications for lighting, stand-by and emergency systems, and fire alarm systems. 4 lecture hours.
|
| |
-
APPE 117 - Electrical Theory, Components, and Applications VII
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Electrical Apprenticeship Students. Topics, theory, and applications covered in this course include specialty transformers, HVAC controls, heat tracing and freeze protection, high-voltage terminations and splices, and electric motors – part III. 4 lecture hours.
|
Apprenticeship Pipefitter Trade |
| |
-
APPF 101 - Introduction to the Pipefitter Trade
1 hr (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. This course introduces the student to the basic job opportunities available in the pipefitter trade as well as to the basic terminology and applications involved with pipefitting. Additional special topics cover general hand tools, hand tool safety, and basic hand tools specific to pipefitting. 1 lecture hour.
|
| |
-
APPF 111 - Introduction to Pipefitter Practices
3 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. Topics and applications covered in this course include pipefitting power tools and power tool safety, threaded pipe fabrication, ladders and scaffolds, motorized equipment, excavations, and underground pipe. 3 lecture hours.
|
| |
-
APPF 112 - Pipefitter Applications I
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. Topics and applications covered in this course include intermediate excavations, underground pipe installation, and pipefitter drawings and detail sheets. Instruction on intermediate excavations includes safety, shoring materials, pre-manufactured support systems, grade and elevation determination, and backfilling procedures. Underground pipe installation includes installing cast iron, ductile iron, vitrified clay, concrete, carbon steel, fiberglass, and thermoplastic pipe. 4 lecture hours.
|
| |
-
APPF 113 - Pipefitter Applications II
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. Topics and applications covered in this course include piping systems, pipefitting trade math, socket weld pipe fabrication, butt weld pipe fabrication, rigging, and pipe hangers and supports. 4 lecture hours.
|
| |
-
APPF 114 - Pipefitter Applications III
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. Topics and applications covered in this course include advanced blueprint reading for the pipefitter, standards and specifications, advanced trade math, additional motorized equipment, and above ground pipe installation. Included in additional motorized equipment are man lifts, cable lifts, hydraulic torque wrenches, hydrostatic test pumps, hydro blaster pumps, drain cleaners, and construction vehicles. 4 lecture hours.
|
| |
-
APPF 115 - Pipefitter Applications IV
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. Topics and applications covered in this course include identification and installation of valves, fielding routing and vessel trim, spring can supports, testing pipe systems and equipment, and basic plumbing. 4 lecture hours.
|
| |
-
APPF 116 - Pipefitter Applications V
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. Topics and applications covered in this course include the planning of work activities, advanced pipe fabrication, performance of NDE testing, and stress relieving and aligning. Advanced pipe fabrication will include piping offsets, miter turns, determining lateral dimensions, fabricating dummy legs and trunions out of pipe, and laying out laterals and supports without using references. 4 lecture hours.
|
| |
-
APPF 117 - Pipefitter Applications VI
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Pipefitter Apprenticeship Students. Topics and applications covered in this course include steam traps, in-line specialties, special piping, hot taps, and valve maintenance. Instruction on special piping will include installing flared and compression joints using copper tubing, soldering and brazing copper tubing and fittings, bending pipe, glass-lined piping, hydraulic fitted compression joints, and grooved piping systems. 4 lecture hours.
|
Apprenticeship HVAC |
| |
-
APPH 101 - Basic Electricity for HVAC
1 hr (Sem II)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. This course introduces the student to the basic electrical theory, terminology, and applications associated with heating, ventilation and air-conditioning systems. 1 lecture hour.
|
| |
-
APPH 111 - Introduction to Heating & Cooling Practices
3 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. Topics and applications covered in this course include introduction to HVAC, copper and plastic piping practices, soldering and brazing, ferrous metal piping practices, introduction to heating, and introduction to cooling. 3 lecture hours.
|
| |
-
APPH 112 - HVAC Applications I
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. Topics and applications covered in this course include air distribution systems, chimneys, vents, and flues, maintenance skills for the service technician, alternating current, and basic electronics and electric heating. 4 lecture hours.
|
| |
-
APPH 113 - HVAC Applications II
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. Topics and applications covered in this course include introduction to control circuit troubleshooting, accessories and optional equipment, metering devices, compressors, heat pumps, and leak detection, evacuation, recovery, and charging. 4 lecture hours.
|
| |
-
APPH 114 - HVAC Applications III
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. Topics and applications covered in this course include planned maintenance and troubleshooting gas heating, electric heating, oil heating, and cooling systems. 4 lecture hours.
|
| |
-
APPH 115 - HVAC Applications IV
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. Topics and applications covered in this course include troubleshooting heat pumps, accessories, and electronic controls, hydronic heating and cooling systems, airside systems, and air properties and air system balancing. 4 lecture hours.
|
| |
-
APPH 116 - HVAC Applications V
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. Topics and applications covered in this course include construction drawings and specifications, indoor air quality, energy conservation equipment, and building managing systems. 4 lecture hours.
|
| |
-
APPH 117 - HVAC Applications VI
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association HVAC Apprenticeship Students. Topics and applications covered in this course include water treatment, system startup and shutdown, heating and cooling system design, and commercial and industrial refrigeration. 4 lecture hours.
|
Apprenticeship Lineman Trade |
| |
-
APPL 101 - Introduction to the Lineman Trade
1 hr (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Students are introduced to the basic terminology, applications, and practices involved in the Lineman trade. 1 lecture hour.
|
| |
-
APPL 111 - Introduction to Lineman Practices
3 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Topics and applications covered in this course include lineman power tools and power tool safety, basic and ISW climbing training and advanced safety. 3 lecture hours.
|
| |
-
APPL 112 - Lineman Applications I
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Topics and applications covered in this course include REAP training, material/bucket training and regulator training. 4 lecture hours.
|
| |
-
APPL 113 - Lineman Applications II
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Topics and applications covered in this course include advanced HE/ISW climbing training, advanced regulator training and advanced material/bucket training. 4 lecture hours.
|
| |
-
APPL 114 - Lineman Applications III
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Topics and applications covered in this course include advanced REAP training and staking training. 4 lecture hours.
|
| |
-
APPL 115 - Lineman Applications IV
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Topics and applications covered in this course include advanced REAP training and substation training. 4 lecture hours.
|
| |
-
APPL 116 - Lineman Applications V
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Topics and applications covered in this course include advanced substation training, 12 KV Rubber gloving training and URD training. 4 lecture hours.
|
| |
-
APPL 117 - Lineman Applications VI
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Lineman Apprenticeship Students. Topics and applications covered in this course include advanced 12 KV rubber gloving, meter training and advanced URD training. 4 lecture hours.
|
| |
-
APPP 101 - Introduction to the Plumbing Trade
1 hr (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. This course introduces the student to the basic job opportunities available in plumbing as well as to the basic terminology and applications involved with the plumbing trade. Additional special topics cover plumbing tools and drawings. 1 lecture hour.
|
Apprenticeship Plumbing Trade |
| |
-
APPP 111 - Introduction to Plumbing Practices
3 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. Topics and applications covered in this course include plastic pipe and fittings, copper pipe and fittings, cast-iron pipe and fittings, carbon steel pipe and fittings, fixtures and faucets, introduction to drain, waste, and vent systems, and introduction to water distribution systems. 3 lecture hours.
|
| |
-
APPP 112 - Plumbing Applications I
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. Topics and applications covered in this course include commercial drawings, installing and testing DWV piping, installing roof, floor, and area drains, and classification of valves. 4 lecture hours.
|
| |
-
APPP 113 - Plumbing Applications II
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. Topics and applications covered in this course include installing and testing water supply piping, installing fixtures, valves, and faucets, installing water heaters, fuel gas systems, and servicing of fixtures, valves, and faucets. 4 lecture hours.
|
| |
-
APPP 114 - Plumbing Applications III
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. Topics and applications covered in this course include plumbing codes, venting techniques, indirect and direct waste, sewage pumps and sump pumps. 4 lecture hours.
|
| |
-
APPP 115 - Plumbing Applications IV
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. Topics and applications covered in this course include sizing water supply piping, backflow preventers, water pressure booster and recirculation systems, and servicing piping systems, fixtures, and appliances. 4 lecture hours.
|
| |
-
APPP 116 - Plumbing Applications V
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. Topics and applications covered in this course include sizing DWV and storm systems, private water supply systems, private waste disposal systems, and locating buried sewer and water lines. 4 lecture hours.
|
| |
-
APPP 117 - Plumbing Applications VI
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Plumbing Apprenticeship Students. Topics and applications covered in this course include hydronic and solar heating systems, water supply treatment, swimming pools and hot tubs, compressed air, corrosive-resistant waste piping, and plumbing for mobile homes and mobile home parks. 4 lecture hours.
|
Apprenticeship Sheet Metal Trade |
| |
-
APPS 101 - Introduction to Sheet Metal Layout
1 hr (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Sheet Metal Apprenticeship Students. This course introduces the student to the basic job opportunities available in the sheet metal work as well as to the basic terminology and applications involved with the sheet metal trade. Additional special topics cover sheet metal tools, fasteners, hangers, and supports. 1 lecture hour.
|
| |
-
APPS 111 - Introduction to Sheet Metal Practices
3 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association sheet Metal Apprenticeship Students. Topics and applications covered in this course include installation of air distribution accessories, insulation, introduction to sheet metal layout and processes, and fabrication (parallel line development). 3 lecture hours.
|
| |
-
APPS 112 - Sheet Metal Applications I
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Sheet Metal Apprenticeship Students. Topics and applications covered in this course include basic piping practices, fabrication – radial line development, bend allowances, and blueprints and specifications. 4 lecture hours.
|
| |
-
APPS 113 - Sheet Metal Applications II
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Sheet Metal Apprenticeship Students. Topics and applications covered in this course include air properties and distribution, sheet metal duct fabrication standards, soldering, and fiberglass ducts. 4 lecture hours.
|
| |
-
APPS 114 - Sheet Metal Applications III
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Sheet Metal Apprenticeship Students. Topics and applications covered in this course include air systems, introduction to welding, brazing, and cutting, and principles of refrigeration. 4 lecture hours.
|
| |
-
APPS 115 - Sheet Metal Applications IV
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Sheet Metal Apprenticeship Students. Topics and applications covered in this course include principles of airflow, comprehensive blueprint and specification reading, fabrication – triangulation, and architectural sheet metal. 4 lecture hours.
|
| |
-
APPS 116 - Sheet Metal Applications V
4 hrs (Sem I)
This course is designed specifically for Associated Builders and Contractors Association Sheet Metal Apprenticeship Students. Topics and applications covered in this course include shop production and organization, air balance, and fabrication – comprehensive review. 4 lecture hours.
|
| |
-
APPS 117 - Sheet Metal Applications VI
4 hrs (Sem II)
This course is designed specifically for Associated Builders and Contractors Association Sheet Metal Apprenticeship Students. Topics and applications covered in this course include louvers, dampers, and access doors, hoods and ventilators, fume and exhaust systems design. 4 lecture hours.
|
Architectural Studies Technology/CAD |
| |
-
ARCH 102 - Architectural Drafting and Print Reading
4 hrs (Sem I, II)
An introductory course covering creation and interpretation of construction documents. Methods of geometric construction, three-dimensional drawing techniques, and sketching will be presented as well as elementary aspects of residential design and site work. Areas of emphasis will include print reading and drawing. 2 lecture hours, 4 laboratory hours.
|
| |
-
ARCH 110 - Fundamentals of Architectural Drawing
3 hrs (Sem I)
An introduction to basic concepts, materials and practices of architectural drawings. Use of instruments, geometric construction, and two and three-dimensional drawing techniques. This course covers the preparation of working drawings in light wood frame construction in order to practice current procedures, dimensioning, notation, and design correlation. This course will also cover the use of construction materials and how these materials are put together on a construction project. Drawing tools are required for individual use. 2 lecture hours, 3 laboratory hours.
|
| |
-
ARCH 130 - Architectural Rendering and Illustration
3 hrs (Sem I, II)
A course in the techniques of pictorial representation: exercises encompass multiview projection, shades, shadows, isometric drawing, perspective drawing, and entourage. Media used may include pen and ink, pencil, felt pens, and various paper and board media to create the above listed illustrations and architectural scale models. 2 lecture hours, 3 laboratory hours.
|
| |
-
ARCH 141 - Introduction to Architectural CAD
3 hrs (Sem I, II)
This course is an introduction to computer aided drafting using AutoCAD software. This course is primarily designed for Architecture, Surveying and Interior Design majors but open to all students interested in learning the basics of AutoCAD. This course will focus on Basic Architectural AutoCAD practices. 2 lecture hours, 3 laboratory hours.
|
| |
-
ARCH 160 - Architectural Working Drawing
5 hrs (Sem II)
Prerequisite(s): A grade of C or better in ARCH 110 and ARCH 141 . Corequisite(s): ARCH 161 . Students will continue to develop skills using instruments to create architectural working drawings for a light commercial/industrial building. Students will also be introduced to commercial/industrial building materials and commercial/industrial building practices. The investigation of the use of local, state and federal codes regulating health and safety will also be presented. Drawing tools are required for individual use. 2 lecture hours, 7 laboratory hours.
|
| |
-
ARCH 161 - Architectural Computer-Aided Drawing
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in ARCH 110 and ARCH 141 . Corequisite(s): ARCH 160 . This course uses AutoCAD and MS Windows to complete architectural working drawings for a light commercial/industrial building. Students will also be introduced to three-dimensional, isometric, and external reference drawings using a CAD system. 2 lecture hours, 6 laboratory hours.
|
| |
-
ARCH 221 - Advanced Architectural Software Applications
4 hrs (Sem I)
This course introduces students to various Architectural software packages and applications which could include Autodesk VIS and Autodesk Revit. 2 lecture hours, 4 laboratory hours.
|
| |
-
ARCH 241 - Intermediate Architectural CAD
5 hrs (Sem I)
Prerequisite(s): A grade of C or better in ARCH 160 and ARCH 161 . Using AutoCAD and MS Windows, this course will emphasize various advanced architectural and engineering applications as related to commercial construction and renovation, along with other PC skills used in professional practice. This course will also introduce the concept of “State Approval Drawings”, where students prepare a set of construction documents that meet minimum state requirements. 2 lecture hours, 7 laboratory hours.
|
| |
-
ARCH 265 - Introduction to Structures
3 hrs (Sem II)
Prerequisite(s): A grade of C or better in MATT 107 or MATH 104 . This course introduces students to basic concepts of statics in structural analysis. The students increase their familiarity with major structural materials in terms of their unique reactions to structural loads and stresses. 3 lecture hours.
|
| |
-
ARCH 271 - Design I
4 hrs (Sem I)
Prerequisite(s): A grade of C or better in ARCH 110 , ARCH 161 and ARCH 130 . A series of lab exercises to introduce fundamental design concepts. The design process will be approached through varied uses of two- and three-dimensional techniques to familiarize students with both design thinking and communication skills. Instruction will include lecture, lab, and presentation settings. 2 lecture hours, 6 laboratory hours.
|
| |
-
ARCH 272 - Design II
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in ARCH 271 and ENGL 101 . A series of lab exercises to develop fundamentals of programming and the design process. The design process will be approached through research, continuation of two- and three-dimensional techniques, communication skills, and model building. 2 lecture hours, 6 laboratory hours.
Speaking Intensive Course
|
| |
-
ARCH 281 - Advanced Design I
4 hrs (Sem I)
Prerequisite(s): A grade of C or better in ARCH 130 . This course is an introduction to the basic principles and elements of design by means of practical and abstract applications. Development of two- and three-dimension presentation skills. Instruction is through presentation and critique in a design studio setting. ARCH 281 is required for students transferring to pursue a baccalaureate degree. 2 lecture hours, 6 laboratory hours.
|
| |
-
ARCH 282 - Advanced Design II
4 hrs (Sem II)
Prerequisite(s): A grade of C or better in ARCH 281 and ENGL 101 . A series of advanced studio exercises to develop a high understanding of the use of a model for structuring design information, fundamentals of programming, research, communication skills and the design process. ARCH 282 is required for students transferring to pursue a baccalaureate degree. 2 lecture hours, 6 laboratory hours.
Speaking Intensive Course
|
| |
-
ARCH 291 - Advanced Architectural CAD
6 hrs (Sem II)
Prerequisite(s): A grade of C or better in READ 011 , or SAT Reading score of 420 or greater, or appropriate placement test scores, and a grade of C or better in ARCH 241 . This course will allow students the opportunity to role-play, conduct business/team meetings and deliver presentations. This course also provides a realistic opportunity to use CAD software and synthesize prior knowledge and experience, to create a set of bid documents for a steel and/or concrete/masonry commercial structure. Students will also calculate the quantity of materials required to erect a structure. This course emphasizes an increased level of professionalism within a team environment. 2 lecture hours, 10 laboratory hours.
Reading, Writing and Speaking Intensive Course
|
Art |
| |
-
ARTT 104 - Design in Materials
3 hrs (Sem I, II)
An introduction to the elements and principles of design for the non-art major. Design projects in both 2-dimensional and 3-dimensional media are used to develop creative thinking and basic technical skills that can be applied and adopted by the student for future use in their specific area of study. 6 studio hours.
|
| |
-
ARTT 110 - Art Appreciation
3 hrs (Sem I, II)
Prerequisite(s): A grade of C or better in READ 009 , or SAT Reading score of 380 or greater, or appropriate placement test scores. An introductory lecture course in art which explores the creative history and processes for making art that have been utilized by humankind across cultures, from the pre-historic through the modern era. Students are introduced to specific traditional and contemporary media for communication and expression. The course utilizes a variety of pedagogical techniques for the study of art that includes viewing projected images and observing actual artworks in the gallery or museum setting. This course is a transferIN course. 3 class hours.
|
| |
-
ARTT 111 - Two-Dimensional Design
3 hrs (Sem I, II)
The course introduces students to the elements and principles of visual language. Line, shape, color, and value structures are studied as the basis for exploration of two-dimensional spatial relationships. Included are the gestalt principle and an investigation of conventional and invented tools and media. Students explore and practice compositional skills that will result in a more sensitive visual aesthetic and sensibility during the course. 6 studio hours.
|
| |
-
ARTT 112 - Color and Design
3 hrs (Sem I, II)
Prerequisite(s): A grade of C or better in ARTT 111 . A continued emphasis on the elements and principles of design as they relate to color theory. Students learn to develop an understanding of the interaction of color relationships through mixing and manipulating both paint and color aid assignments. 6 studio hours.
|
| |
-
ARTT 114 - Three-dimensional Design
3 hrs (Sem I, II)
An introduction to basic formal and practical considerations involved with three-dimensional design and object making. Objectives are to build awareness and understanding of art elements and their interaction in space, to recognize and create three-dimensional form and content and to develop discipline in thinking and in manual skills. This is done through intensive problem solving using a variety of materials, techniques, processes and simple power and hand tools. 6 studio hours.
|
| |
-
ARTT 116 - Drawing I
3 hrs (Sem I, II)
A structured exploration of foundation concepts and approaches to drawing. Study topics include the elements and principles of design with emphasis on composition, line, shape, space, value, perspective, form and content. A variety of drawing media and techniques are explored through specific assignments based in observation and interpretive drawing. Emphasis is placed on critical thinking, problem solving, and development of perceptual skills. This course is a transferIN course. 6 studio hours.
|
| |
-
ARTT 117 - Drawing II (Life Drawing)
3 hrs (Sem I, II)
Prerequisite(s): A grade of C or better in ARTT 116 . A structured foundation course in the study of the human form through observation based and interpretive figure drawing assignments. Study topics include form, anatomy, structure, movement, and expressive potential of the human figure. A variety of media, concepts, and techniques are used that relate to drawing the human figure. Emphasis is placed on critical thinking, problem solving, concept development, and the development of perceptual skills. 6 studio hours.
|
| |
-
ARTT 120 - Introduction to Traditional and Digital Photography
3 hrs (Sem I, II)
This course is an introduction to photographic principles and techniques using a Film or Digital 35mm camera and digital darkroom studio/lab. Areas of skill development include emphasis on technical and aesthetic aspects of historical and contemporary photographic work and the elements and principles of visual design. Specific hands-on color and black and white photographic assignments are used to develop technical and creative control of the medium, with applications in creative and academic research and industry. A 35mm camera (film or digital) with adjustable aperture and shutter speed and light meter required. 6 studio/laboratory hours.
|
| |
-
ARTT 130 - Art History I–Pre-history to 1500
3 hrs (Sem I, II)
Prerequisite(s): A grade of C or better in READ 011 , or SAT Reading score of 420 or greater, or appropriate placement test scores. A survey of painting, sculpture and architectural styles from ancient cultures to the pre-Renaissance era with an emphasis on Western art. This course explores the historical context of art movements as well as the analysis of individual artists and works of art. This course is a transferIN course. 3 class hours.
|
| |
-
ARTT 131 - Art History II–1500 to 20th Century
3 hrs (Sem I, II)
Prerequisite(s): A grade of C or better in READ 011 , or SAT Reading score of 420 or greater, or appropriate placement test scores. A survey of painting, sculpture and architectural styles from the Renaissance era to the 21st Century with an emphasis on Western art. This course explores the historical context of art movements as well as the analysis of individual artists and works of art. This course is a transferIN course. 3 class hours.
Reading and Writing Intensive Course
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
… Forward 10 -> 16 |